The TMJL 50 pump is intended for use on low pressure side of SKF OK couplings. It works also well with Hydraulic nuts HMV E (all sizes) and for mounting and dismounting bearings or components where a maximum pressure of 50 MPa (7 250 psi) is required. Alternatively, it can be used with other common hydraulic applications that require hydraulic pressures of up to 50 MPa (7 250 psi).
The versatile pump is supplied in a sturdy wooden quality carrying case making it ideal for using both in the workshop and onsite. It comes with a mounted 3 000 mm (118 in) long pressure hose and quick connect coupling. The pump is pre-filled with Mounting fluid LHMF 300. A mating nipple and an extra litre of this mounting fluid are supplied in the tool case as well. The pump is also suitable for LHDF 900 Dismounting fluid.
Features & benefits
Versatile design
Ready to use; fitted with hose and quick connection coupling
Integrated overpressure valve and port for a pressure gauge
Ideal for workshop or on-site use
Large oil container, capacity 2700 cm³ (165 in³) pre-filled with LHMF 300
Packed in a sturdy protective case
Applications
SKF OK coupling hydraulic chambers
All sizes Hydraulic nut
Oil injection applications where the maximum pressure is 50 MPa (7 250 psi)
General hydraulics where pressures up to 50 MPa (7 250 psi) are required
The TMJL 50 pump is intended for use on low pressure side of SKF OK couplings. It works also well with Hydraulic nuts HMV E (all sizes) and for mounting and dismounting bearings or components where a maximum pressure of 50 MPa (7 250 psi) is required. Alternatively, it can be used with other common hydraulic applications that require hydraulic pressures of up to 50 MPa (7 250 psi).
The versatile pump is supplied in a sturdy wooden quality carrying case making it ideal for using both in the workshop and onsite. It comes with a mounted 3 000 mm (118 in) long pressure hose and quick connect coupling. The pump is pre-filled with Mounting fluid LHMF 300. A mating nipple and an extra litre of this mounting fluid are supplied in the tool case as well. The pump is also suitable for LHDF 900 Dismounting fluid.
Features & benefits
Versatile design
Ready to use; fitted with hose and quick connection coupling
Integrated overpressure valve and port for a pressure gauge
Ideal for workshop or on-site use
Large oil container, capacity 2700 cm³ (165 in³) pre-filled with LHMF 300
Packed in a sturdy protective case
Applications
SKF OK coupling hydraulic chambers
All sizes Hydraulic nut
Oil injection applications where the maximum pressure is 50 MPa (7 250 psi)
General hydraulics where pressures up to 50 MPa (7 250 psi) are required
.png){kind=small}
.png){kind=small}
.png){kind=small}
